specifications subject to change without notice. specifications switch function: spst, 2 thru 12 positions (except position 11) contact rating: switch: 25ma @ 24v dc carry: 100ma @ 50v dc insulation resistance: 100 m min. @ 500v dc contact resistance: initial: 50 m typical @ 2-4v dc @ 100ma after life: 100m typical @ 2-4 dc @ 100ma operating life: 2,000 make-and-break cycles, each circuit operating force: 1000 gf max. travel (actuator): 2.0 mm typical dielectric strength: 500v rms min. @ sea level between adjacent terminals temperature range: operating/storage: -40 c to 85 c vibration: to mil-std-202f, method 201 a shock: to mil-std-202f, method 213b, condition a soldering recommendations: wave: 500 f (260 c) for 5s max; hand: 30w soldering iron @ 608 f (320 c) for 2s typical. keep all switches in the ?off? position during soldering and cleaning process. materials housing and actuator: glass filled polyester (pbt) ul94-v0 contacts: phosphor bronze with gold plate over nickel plate terminals: phosphor bronze with gold plate over nickel plate tape: mylar switches are supplied in standard ic tubes with all poles in the ?off? position. packaging series circuit termination no. of positions p = piano type 1 = spst 1 = pc pin seal model no. ka how to order 02 03 04 05 06 07 08 09 10 12 (none) = std. unsealed t = top tape sealed example ordering number ka _ p _ 1 _ 1 _ 04 _ r _ t actuator r = recessed act., top side off e = extended act., top side off v = recessed act., top side on w = extended act., top side on ka features & benefits piano style top side off or top side on option tape seal option applications/markets garage door openers test & instrumentation telecommunications controller application cap options detector switches rotary switches keylock switches dip switches snap-action switches slide switches rocker switches toggle switches pushbutton switches navigation switches tact switches 218 fax: 763-531-8235 phone: 800-867-2717 series KAP switches piano dip switches
number of positions r recessed topside ?off? e extended topside ?off? position 1 denotes pin no. 1. KAP 1 pc pin termination options p.c. mounting schematic ?a? 6.64 9.18 11.72 14.26 16.8 19.34 21.88 24.42 26.96 32.04 dimension: (.261) (.361) (.461) (.561) (.661) (.761) (.861) (.961) (1.061) (1.261) ?b? 2.54 5.08 7.62 10.16 12.7 15.24 17.78 20.32 22.86 27.94 dimension: (.100) (.200) (.300) (.400) (.500) (.600) (.700) (.800) (.900) (1.100) positions: 2 3 4 5 6 7 8 9 10 12 actuator options seal options t top tape sealed v recessed topside ?on? w extended topside ?on? cap options detector switches rotary switches keylock switches dip switches snap-action switches slide switches rocker switches toggle switches pushbutton switches navigation switches tact switches 219 info @ e-switch.com www.e-switch.com
|